Lumateq LB170 Bedienungsanleitung Seite 2

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 2
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 1
LUMATEQ is a division of TACO Metals, Inc.
To view the entire portfolio of LUMATEQ products and for Warranty and Product Information, go to lumateq.com
Corporate Headquarters 50 NE 179 Street, Miami, FL 33162 • 305.770.2392 • Fax: 305.653.8569 ©2014 All Rights Reserved
INSTRUCTIONS
Plastic Cap Lock Nut
Washer
Metal Lock Nut
Metal Lock Nut
1/2" Threaded Nipple
Plastic Cap Lock Nut
Washer
Steel Bracket
Follow instructions carefully!
Wiring Instructions
Note: Always hire a licenced electrician for proper installation. Always mount this xture to a grounded junction / breaker box.
Caution:
• RiskofFire/ElectricalShock.Ifnotqualied,consultanelectrician.
• Disconnectpoweratfuseorcircuitbreakerbeforeinstallingorservicing.
• Edgesmaycut.Handlewithcare.
1) WARNING: Turnoffthepoweratthemainfuseorbreakerbox.
2) Threadxturewiresthroughcoverplategasketandthreadednipple.
3) Attachthegroundwirefromthexturetothegroundwireintheelectricalbox.Ifnogroundisavailableattachxtureground
wiretothejunctionbox.
4) Allpowerconnectionsshoulduseapprovedwirenutsforthewiresize.(Werecommendusingagoodgradeelectricaltape
toinsulatethewirenutconnectionsbeforesealingthebox.)
5) •110-120V ACwiringattachtheBlackwirefromthexturetotheBlack(Hot)wireintheboxattachtheWhite
wirefromthexturetotheWhite(Neutral)inthebox.
•220-240V ACinstallationsattachtheBlackwirefromthexturetotheoneoftheBlack(Hot)leadsinthebox
andthenattachthexturesWhiteleadtotheotherBlack(Hot)wireinthebox.
•277V ACAttachtheBlackleadfromthexturetothe277V(Hot)leadintheboxandtheWhiteleadfromthe
xturetotheNeutralleadinthebox.
6) Attachxturetothejunctionboxwithtwoscrews.Either(2)#6-32or(2)#8-32screwswillworkwithmoststandardjunctionboxes.
Ifnotmountingtoabox,twoholesareprovidedtoushmounttoasmoothsurface.
7) Applysiliconecaulkaroundtheedgeofthecoverplatetoprovideawatertightsealfromrainandmoisture.
8) Turnonpoweratmainfuseorbreakerbox.
Troubleshooting
W
A
R
N
I
N
G
!
E
l
e
c
t
r
i
c
a
l
D
e
v
i
c
e
Tools Required
Make sure you have these items for xture installation.
• PhillipsScrewdriver
• Pliers
Required Items (Purchase Separately):
• SiliconeCaulking
• (3)WireNuts
Problem Possible Cause
CorreCtive aCtion
Light does not come on
No power to the fixture
Wiring to the unit is loose
Check if circuit breaker is tripped
Confirm fixture is properly grounded
INSTRUCT-BLASTER_90_120_170
Seitenansicht 1
1 2

Kommentare zu diesen Handbüchern

Keine Kommentare